Welcome to the 50G Junior & Superwash Help Center!

Here you can find the 50G Junior and 50G Superwash manual and videos to learn more about your 50G. If you need further assistance, please call us at 800-869-1800!

Manuals & Guides

Drum Alignment Tips

  1. Loosen but DON’T REMOVE the four bearing mounting bolts and motor mounting bolts.
  2. Place golf balls in the slots between the ball guides in the front of the drum. Rotate drum toward you, about 1⁄4 of the way. Place golf balls in the slots in back of drum. Rotate the drum away from you so that the balls are between the inner and outer drums.
  3. Leave the balls in place and tighten the bearings and motor mounting bolts. The drum is now horizontally aligned. Make sure coupler set is level after tightening bolts.
  4. Gently rotate the top of the drum toward the front of the machine. The drum should turn smoothly and evenly as balls travel between the lower guides and appear behind the drum.
  5. If the balls bind or jam, or if the drum turns with uneven resistance, there are two possible causes to check.

Changing Rubber Strips

Instructions on changing rubber strips go here…